New H130 Loader

2 Family (25-32HP)
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Compatible with the 2025R and 2032R
  • Quik-Park™ loader mounting system
  • Built to improve visibility and stand up to years of use
  • Up to 717 pounds (326 kg) of lift capacity

More Info

Features

End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pinPivot pin

The unique offset head design eliminates cross-pins and cotter pins to retain the pin.

 

A nut ensures the pins remain in position.

 

A lubrication groove provides a path for lubrication.

 

End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.

Quik-Park™ loader mounting system
Quik-Park loader mounting systemQuik-Park loader mounting system

The H130 Loader is designed for easy removal/mounting to/from the tractor without tools.

 

The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.

 

To view a video of how the Quik-Park™ system works, click here.

 

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Specifications

Tractor
Model 2025R
Front tire 23X8.50-12 6PR R4
Rear tire 12-16.5 6PR R4
Front axle configuration
Wheelbase 1600 mm
63.0 in.
Pump capacity 12.7 L/min
3.35 gpm
Rated pressure 166.9 bar
2421 psi
Loader
Leveling configuration Non-Self Leveling
Bucket used 1250 pin-on mm
49 pin-on in.
Bucket weight 70.2 kg
154.4 lb
Lift capacity at full height Measured at pivot (U)
465 kg
1023 lbMeasured at 500 mm ahead of pivot (V)
325 kg
715 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
567 kg
1247 lbMeasured at 500 mm ahead of pivot (X)
416 kg
915 lb
Boom breakout force Measured at pivot (Y)
1140 kg
2508 lbMeasured at 500 mm ahead of pivot (Z)
734 kg
1615 lb
Bucket rollback force capacity At maximum height (VV)
749 kgf
1648 lbfAt 59-in. (1500-mm) lift height (XX)
931 kgf
2048 lbfAt ground-level line (ZZ)
785 kgf
1727 lbf
Dimensions Maximum lift height (A)
1999 mm
78.7 in.At full height - bucket level(B)
1838 mm
72.4 in.At full height - bucket dumped (C)
1570 mm
61.8 in.
Overall length (I+F), ft (m) 2.8 m
9.3 ft
Overall height in carry position (J) 1.2 m
3.9 ft
Digging depth (H) 93 mm
3.7 in.
Reach At maximum height (D)
625 mm
24.6 in.At ground level - bucket level (F)
1225 mm
48.2 in.
Bucket angle Dump angle, degrees (E)
38 degree (angle)Rollback angle, degrees (G)
24.5 degree (angle)Dump angle, ground
118 degree (angle)
Cycle times Loader raise, seconds
4.73 secondsLoader lower, seconds
2.88 secondsBucket dump, seconds
4.73 (without regen)/1.85 (with regen) secondsBucket rollback, seconds
2.88 seconds

Accessories and Attachments

Ballast Box:

Ballast Box - BW15073
Ballast Box Extension - BW15074

Buckets:

49 In. (1250mm) Loader Materials Bucket - Quik Change - BW14144
49 in. (1250mm) Materials Bucket - Pin ON - BW15896
53 In. (1350mm) Loader Materials Bucket - Quik Change - BW14145
61 In. (1550mm) Loader Materials Bucket - Quik Change - BW14146

Carrier:

John Deere CUT Carrier - BW15939

HITCH ADAPTERS

iMatch / Quik-Coupler Bushing Kit - BW15056

Hood Guards:

Hood Guard (MY '16 and Older 2032R, 2520, 2720 Tractors) - BW15634
Hood Guard (MY '16 and older 2025R (Yanmar built), 2320, 2210 and 2305 Tractors) - BW15217

Miscellaneous (Australia Only):

Anti Spill Kit - BW16198
Australian Code of Practice Kit - BW16244
Service Lock - BW16278

Miscellaneous:

Bucket Level Indicator - BW15476

Mounting Frames:

Mounting Frame - BW15324
Mounting Frame - BW15426
Mounting Frame - BW15731
Mounting Frame - BW15730